|
Junior Windmill: NOTE - This mill is no longer manufactured, however parts are still available. |
|
| The letter before each number means: | G - DOUBLE GEARED MILL ONLY D - DIRECT ACTION OIL BATH MILL ONLY J - DIRECT ACTION JUNIOR MILL ONLY |
| GD102 means Bearing for both Double Geared and Direct Action Oil Bath Windmills | |
| Code | Description | Excluding GST | Including GST |
| 034 | Shaft Bearing Housing (each) | $28.00 | $30.80 |
| 1020 | Shaft Bearings (each) | $27.00 | $29.70 |
| J01 | Body Pipe, Housing, Sleeve & Collar | $387.00 | $425.70 |
| J02 | Shaft with Flange only | $89.00 | $97.90 |
| J03 | Pitman Arm with Bush | $54.00 | $59.40 |
| J04 | Fibreglass Cover | $55.00 | $60.50 |
| J05 | Brass Bush plain (each) | $13.00 | $14.30 |
| J06 | Plastic Bush flanged (per pair) | $18.00 | $19.80 |
| J07 | Rocker with Bushes fitted | $89.00 | $97.90 |
| J08 | Swivel Casting | $28.00 | $30.80 |
| J09 | Swivel Rod | $26.00 | $28.60 |
| J10 | Rocker Bolt | $5.00 | $5.50 |
| J11 | Pullout Pin | $22.00 | $24.20 |
| J12 | Bearing Block (each) | $14.00 | $15.40 |
| J13 | Black Plastic Rollers (per pair) | $11.00 | $12.10 |
| J14 | Flange Bolts (per 5) | $6.00 | $6.60 |
| J15 | Rocker Pins | $7.10 | $7.81 |
| J16 | Set Screw 5/16 x 3/8 | $0.75 | $0.83 |
| J17 | Sleeve (Galvanised) | $108.00 | $118.80 |
| J19 | Pullout Claw with link | $165.00 | $181.50 |
| J20 | Crank with Pin | $45.00 | $49.50 |
| J21 | Crank Bolt & Nyloc Nut | $8.50 | $9.35 |
| J22 | Shaft complete with Flange, Bearings & Crank | $286.00 | $314.60 |
| J23 | Rocker Assembly (Pitman, swivel, Bushes & Pins) | $213.00 | $234.30 |
| J24 | Set Screw & Nut 3/8 x 3/4" | $5.00 | $5.50 |
| J25 | Studs - 10x45 ZP (4 of) | $6.00 | $6.60 |
| J26 | Crank Bearing (each) | $49.00 | $53.90 |